Sharp Twin Famicom AN-500R (SINGLE CONSOLE+AC EURO+AV Cable) NEW BELT-SERVICED
Supports Famicom Disk and famicom cartridge
📦INCLUDED:
Twin FAMICOM Unit AN-500R
Ac European ADAPTER
RCA Av cables
✅NEW drive Belt (unit is reading / working)
✅Drive unit (Floopy disk): Serviced / Calibrated (greased ,correct spring tension, speed adjusted, head alignment calibrated, etc.)
✅TESTED, Working
✅GOOD condition overall
ℹ️We have quite a few units: the pictures, serial number, outer box of the UNIT will not be the same, but in similar described condition. Please do not hesitate to contact asking for pictures of the unit we are going to send.
🔎Unit: good condition, light discoloration, light scratches light wear. NOTHING MAJOR
🎌Japanese Unit (NTSC-J)
⚠️IMPORTANT NOTE: If connecting the unit to a voltage other than 100–120 V, please use one of the following options:
STEPDOWN TRANSFORMER with the original AC Adapter of this unit
Universal AC➡️DC adapter (supplied) with: -Input: 100-240V -Output: close to 7.6V and 1250mA -POLARITY: ⊖──●──⊕
Using an incorrect adapter/polarity may DAMAGE the console
💡 Informative note:
The LED 'ON/OFF' indicator ONLY lights up when the Disk System is active - this is normal behavior by design.
To switch from ''cartridge'' (カセット) to ''disk'' (ディスク) you have to 1st Stop the console (optional) / 2nd remove the cartridge, set the switch to ''disk'' (ディスク) and RESET/Re-start the unit. The LED will light up when the Disk System is engaged.
Sometimes at the start up, you might get some 'disk' reading errors. This is because the Disk System unit is not at the initial reading position. Please leave it until it completes the cycle and let it return to the inicial reading position. Then reset the system or re-insert the game.
📩 If you have anyquestions PLEASE CONTACT USand we will try to help you out
